Need help on modifying NTP configuration via cli .

[Sarovani CK]

Current configuration :

> show ntp server

    NTP Server: 10.10.10.1

    Minimum Poll Interval: 6 (64secs)

    Maximum Poll Interval: 10 (1024secs)

    Preferred: NO

    Key: 1003

    NTP Server: 10.10.10.2

    Minimum Poll Interval: 6 (64secs)

    Maximum Poll Interval: 10 (1024secs)

    Preferred: YES

    Key: 1003

 Done

Modification :

modify ntp server 192.168.6.1

modify ntp server 192.168.8.1

set ntp server 192.168.6.1 -preferredNtpServer YES

save config .

Can you please confirm if I can use the above commands for ntp modification ?And will there be any impact of doing the ntp modification ?

[Vikram Majjari]

The new configuration works if same authentication key ( here 1003) is configured on new ntp server